01Racking
Rails anchored into the rafters and leveled before a single panel goes up.
Powering Massachusetts since 2016
Panel upgrades, rewiring, EV chargers, generators and full solar installs for homes and businesses. Done to code, cleaned up, and explained before we leave.
What we do
Every panel door has a schedule taped inside that says what each breaker runs. This is ours.
Racking, wiring and panels, start to finish, by the same crew.
Service upgrades, replacements, and the breaker that keeps tripping.
Level 2 charger in the garage or driveway, sized to your panel.
Recessed lights, fixtures, landscape and security lighting.
Standby and portable hookups with a proper transfer switch.
Dedicated circuits and disconnects for heat pumps and AC units.
Old or unsafe wiring replaced, room by room or the whole house.
GFCI, dimmers, USB outlets and new circuits where you need them.
Mounted on a rated box, balanced and quiet.
Flickering lights, dead outlets, a warm switch plate. We find the cause.
Panels off for a new roof, and back on when the roof is done.
New construction rough-in, fit-outs and service upgrades.
Not sure which one you need? Describe the problem and we'll tell you.
Get a free estimateSolar
Most of our 2025 season was spent on rooftops. We do the whole install ourselves, so there's no hand-off between a racking crew, a wiring crew and a panel crew.
Rails anchored into the rafters and leveled before a single panel goes up.
Conductors run, grounded and tied into your electrical panel to code.
Panels set and checked, then the system is turned on and tested with you.
Getting a new roof? We disconnect and take down your panels, racking and wiring, then reinstall the system when the roofers are done.
Recent work









How it works
Send the form or call. A photo of the panel or the problem helps a lot.
We come out, look at what you have and give you a written price.
Done to code, with permits when the job needs them. We clean up as we go.
We test everything with you and show you what we did before we leave.
Who we are
Gomes Electrical started in 2016 as a family business, and it still is one. The people on your job are the people who own the company, so the work has to be right.
We show up when we say we will, keep you posted while we work, and leave the place as clean as we found it.
Reviews
They put in our whole solar system and walked us through the app before leaving. Clean job, no surprises on the price.Homeowner, Milton MA
Our roofer needed the panels off fast. Gomes had them down in a day and back up right after. Easy to deal with.Homeowner, Randolph MA
Breaker kept tripping for months. They found a bad connection in an hour and fixed it the same visit.Homeowner, Massachusetts
FAQ
Yes. Estimates and inspections are free, and you get the price before any work starts.
Yes. When a job needs a permit, we pull it and schedule the town inspection, so you don't have to deal with it.
Often it can. We check how much room your panel has first. If it's full, we'll explain the options, from a load manager to a panel upgrade, and what each one costs.
Yes. We disconnect and remove the panels, racking and wiring, and reinstall the system once the new roof is on.
Homes and businesses across Massachusetts, including Greater Boston, the South Shore and the Merrimack Valley. Not sure if we cover your town? Send the form and ask.
Yes. New construction rough-in, tenant fit-outs, lighting and service upgrades for businesses.